FastReporter 3 | EXFO

Removing the Snag Out of Post-Processing Analysing optical test data presents various challenges whether for loss, ORL, OTDR and iOLM testing, connector inspection, or advanced characterization such as PMD and CD.

OI Software | iOLM and OTDR Combined | EXFO

Upgrade your tester to OTDR and iOLM software combined. The iOLM is designed to simplify OTDR testing by eliminating the need to configure parameters, and/or analyse and interpret multiple complex OTDR traces.

FIP 435B | Wireless Inspection Probe | EXFO

Turn your Android™ device into a fully automated fibre inspection solution delivering fast and consistent test results. With no wire in your way or cumbersome battery pack, it provides unmatched user experience combined with bring-it-anywhere portability.

MaxTester 945 | OLTS | EXFO

The MaxTester 945 (MAX945) boasts a 7-inch touchscreen, the largest and most user-friendly display in the industry to simplify tasks for the technician.

FIP 430B | Fibre Inspection Probe | EXFO

This intelligent and automated test tool transforms fibre inspection into a faster and simplified one-step process providing accurate and consistent test results, and preventing the reporting of false-positive results.

FIP 420B | Fibre Inspection Probe | EXFO

The FIP 420B is a connector inspector using automated analysis software to assess connector quality is an essential step during fibre commissioning and installation, and an integral part of best practices.

FOT-300 | Optical Loss Tester | EXFO

The FOT-300 is the most optimised OLTS on the market, combining a source port and a power meter. It transmits with a wavelength-identification digital encrypted protocol, so that any compatible unit—such as another FOT-300 Optical Loss Test Set—can automatically use the proper calibration parameters.

FLS-600 | Light Source | EXFO

Part of EXFO’s 600 handheld series, the FLS-600 Light Source is designed for first-class testing. What’s more, you can save time by building a list of your “favourite” wavelengths and only sweeping through these wavelengths when testing.

EUI Light Source Adapter | EXFO

Connector adaptor for use with EXFO test equipment that use EUI adaptors for the light sources such as: FLS600 FOT600 FOT930 EXFO OTDR's EUI's can be used for UPC or APC interfaces.

FOA Adapter | EXFO

Connector adaptor for use with EXFO test equipment that use FOA adaptors for the power meters such as: FPM600 FOT600 FOT930 EXFO OTDR's with optional power meter

Probe Tips | EXFO

Removable tips for use with the EXFO range of FIP inspection probes.

FLS 140 | Visible Fault Locator | EXFO

The FLS-140 is the easiest way to identify optical fibres from end to end and locate polished connector endfaces. Its red laser shines through most yellow-jacketed optical fibres to help you pinpoint breaks, bends, faulty connectors, splices and other causes of signal loss. It has a reach of up to 5 km.

FLS 240 | Visible Fault Locator | EXFO

The FLS-240 Pocket Pal Visual Fault Locator is a straightforward solution for identifying breaks, bends, faulty connectors or splices, as well as other causes of signal loss. It can detect faults over distances of up to 5 km.

1.25mm VFL Adapter | EXFO

2.3mm to 1.25mm adapter for the EXFO FLS-240 Visual Fault Locator.

Belt Holster for FIP-435B or 425B

Belt holster for FIP-425B / 435BFits one FIP-425B or 435B, Extra tips, Two IBC cleaner, FLS140 VFL or Penand one Smartphone (150x75x10 mm)

Max Tester 730C | FTTx/PON Singlemode OTDR | EXFO

Discontinued Model - Check out the NEW 730D OTDR!

Max Tester 720C | Access OTDR | EXFO

The MaxTester 720C (MAX-720C) provides users with accuracy, along with first-time-right fibre characterisation. The tablet-inspired OTDR has an effective dynamic range, and is optimised for single mode and multimode field testing.

Max Tester 715B | Last-Mile OTDR | EXFO

The MaxTester 715B (MAX-715B) is one of the first tablet-inspired OTDR within the 700B series. The MaxTester 715B OTDR is optimised for the point-to-point testing and troubleshooting of FTTx architectures and is ideal for testing short fibers.

FTB-2-Pro Platform | EXFO

The FTB-2-Pro is the most compact solution on the market for multi-service, multi-technology, multi-rate testing which delivers all the power of a larger platform in a conveniently sized field-testing tool.

FTB-2 Platform | EXFO

The FTB-2 is the most compact solution on the market and enables technicians to utilise one tool which has a multitude of applications and to perform all tests quickly and accurately.

FTB-1v2-Pro DC Platform | EXFO

The FTB-1-Pro is a light-weight, compact modular test platform allowing field technicians to carry out dedicated optical, Ethernet and multi-service test applications simply and efficiently.

FTB-500 Platform | EXFO

The FTB-500 provides boundless capabilities and expert multi-modular platform design for true next-generation network testing. The platform brings you new, highly advanced applications and pushes your current ones’ efficiency to new heights.

MAX-860G | Netblazer Series | EXFO

With the MAX-860G you can single handedly scan a network and connect to any available EXFO datacom remote tester, meaning you no longer need an additional technician at the far end!

FTB-4-Pro Platform | EXFO

The FTB-4-Pro platform offers the industry’s smallest form factor for 100G commissioning. As well as this, the FTB-4-Pro is able to turn-up and troubleshooting, as well as delivers unprecedented power, flexibility and scalability for tests in high speed networks, data centers and R&D labs.

FOT-600 | Optical Loss Tester | EXFO

The FOT-600 Optical Loss Test Set is the ideal tool for network-link qualification. Designed for first-class ease of use, the FOT-600 features a pass/fail LED indicator; what’s more, it lets you set your own thresholds for absolute or relative loss measurements.

FiberBasix ILM Kit | EXFO

FiberBasix 50 Handheld Testers deliver simple, accurate measurement of signal attenuation during fiber-optic cable installation.

iOptics | EXFO

The iOptics provides rapid analysis of the optical interfaces, with quick pass/ fail verdicts. The iOptics—Intelligent Pluggable Optics test application was designed as the first tool that should be used to assess any transceiver being installed in a network element deployed in the field or lab environment, and serves to validate proper operation of the optical device.

Optical RF | EXFO

The Optical RF is the industry’s most powerful real-time, high resolution RF spectrum analysis over CPRI.

MAX 800 Series | Ethernet Testing | EXFO

Efficiently turn up and troubleshoot 64K circuits up to 100G networks smarter, simpler and faster.

Fiber Guardian | EXFO

The Fibre Guardian is a truly scalable product from one stand-alone unit to a centrally managed system, without the hassle of any upgrades. The Fiber Guardian is a plug-and-play solution that is simple enough for beginners, yet powerful and flexible enough for experts.

Connect | EXFO

EXFO Connect completely redefines integrated testing with its cloud-hosted solution and its automated, secure environment that links together your EXFO test instruments and centralizes captured data across your organization.

FTBx-720C | LAN/WAN Access OTDR | EXFO

The FTBx-720C is an OTDR module that is best suited for typical short and access networks. It is also able to perform both singlemode and multimode testing.

EX1 | EXFO

The EX-1 is a scalable, open platform test solution for validating bandwidth speed and monitoring network performance.

TK-SWITCH MPO Test Kit | EXFO

The EXFO TK-SWITCH MPO Test Kit is a versatile, scalable and automated solution to meet todays networking challenges.

Automated Multifiber Inspection Solution | EXFO

Multi-fiber inspection tip compatible with EXFO’s MF-ready fiber inspection probe series and designed for easy access to recessed connectors in dense panels.

MPC-100 | Optical Power Checker | EXFO

The MPC-100 is an innovative optical power checker enabling smart device connectivity via Bluetooth®. This Micro Optical Power Checker brings optical testing capability to your Android™ or iOS smart device.

FTB-5500B | PMD Analyzer | EXFO

The FTB-5500B delivers fast and reliable performance in a field-ready unit for all chromatic and polarization dispersion testing needs, from verifying the capacity of legacy fiber to upgrading a network to a given rate.

FTB-5600 | PMD Analyzer | EXFO

The only distributed PMD analyzer on the market that offers simplified PMD assessment for identification of faulty sections on links.

FTB-5700 | Single-Ended Dispersion Analyzer | EXFO

The FTB-5700 is the ultimate CD/PMD characterization solution.

FTB-5800 | Chromatic Dispersion Analyzer | EXFO

Delivers fast and reliable performance in a field-ready unit for all chromatic and polarization dispersion testing needs, from verifying the capacity of legacy fiber to upgrading a network to a given rate.

FLS-5800A | CD/PMD Analyzer Source | EXFO

The FLS-5800A is a modulated, polarized, high-power CD/PMD Analyzer Source that can also be used as a broadband source for DWDM channel and component testing.

FTBx-735C | Metro/PON FTTx/MDU OTDR | EXFO

The FTBx-735C has been designed to test FTTH/PON networks and longer links in the metro range. The high-resolution OTDR designed for metro networks testing and splitter characterisation in PON FTTx applications.

FTBx-740C | xWDM OTDR | EXFO

The FTBx-740C includes one CWDM tunable OTDR module to cover all 18 CWDM channels from a single port, and one DWDM tunable OTDR module to cover DWDM C-Band channels. This solution is available for the FTB-1 V2, FTB-2 and FTB-4 platforms.

FTBx-750C | Metro/long-haul OTDR | EXFO

The FTBx-750C is an OTDR module designed to characterise metro and long-haul networks and a high dynamic range of 46dB.

FTB-7600E | Ultra-long-haul OTDR | EXFO

The FTB-7600E OTDR module is designed for powerful ultra-long-haul testing. When distancing is an issue, the FTB-7600E OTDR module will be able to tackle the task due to its dynamic range of up to 50.5 dB.

ConnectorMax MPO Link Test Solution | EXFO

Automated, all-in-one solution to validate MPO/MTP® fiber optic links of any type, including MPO 12 and MPO 24 singlemode or multimode cables as well as APC or UPC and male or female connectors.

PPM 350D | Next-Gen PON Power Meter | EXFO

The first PON-aware™ power meter to automatically detect and test next-gen and legacy PON technologies.

OX1 | Optical Explorer | EXFO

The first optical fibre multi-meter (OFM): Link verification with embedded fault tracking. Verify optical links in seconds and automatically explore further when potential issues are suspected. Accelerate fibre deployments, simplify activation procedures and improve robustness of repairs for better QoS and MTTR.

Click-Out™ Optical Connectors | EXFO

The EXFO Click-Out™ Optical Connector is an additional accessory for the OX1.

PX1 | Optical Power Expert | EXFO

The Optical Power Expert is an essential device in today's field toolkit. This robust power meter delivers best-in-class optical performance, featuring Bluetooth connectivity, compact and intuitive colour touchscreen, IP54 dust and water protection and high-capacity internal data storage.

FTBx-5235 | Optical Spectrum Analyzer | EXFO

The FTBx-5235 Optical Spectrum Analyzer is the new compact module designed to measure channel power and wavelength, characteristics and analyse DWDM networks.

FTBx-5245/5255 | Optical Spectrum Analyzers | EXFO

The FTBx-5245/5255 provides improved reliability and accuracy when testing on the field as it provides technicians with all the tools they need.

Max Tester 740C | Optical Wave Expert | EXFO

The Optical Wave Expert is a handheld tester combining DWDM channel power validations with OTDR capabilities on a single port.

FTB-7400E | Metro/OTDR | EXFO

High-resolution OTDR module covering longer metro distances.

FTBx-940 | Fibre Certifier OLTS | EXFO

The OLTS module for data centre and enterprise Tier 1 fibre certification.

FTBx-945 | Fibre Certifier OLTS | EXFO

The fastest module OLTS for data centre and enterprise Tier 1 fibre certification.

FTBx-8870 | Power Blazer | EXFO

The FTBx 8870 is a versatile 10G multiservice test module for lab and field applications.

FTBx-8880 | Power Blazer | EXFO

The FTBx 8880 is the most versatile 10G multiservice test module for lab and field applications.

FTBx-88100NGE | Power Blazer | EXFO

The FTBx 88100NGE is a multiservice test module, and is a turnkey field-test solution for networks up to 100G.

FTBx-88200NGE | Power Blazer | EXFO

The FTBx 88200NGE is EXFO’s new multi-service test module, capable of testing traffic from 10 Mbit/s to 100G.

FTBx-88260 | Multiservice Test Module | EXFO

The FTBx 88260 module is built to handle multiple transceiver types via EXFO’s Open Transceiver System (OTS).

EXFO 100G Tester (FTB 1v2 Pro)

Test 100G with our FTB 1v2 Pro and FTBx-88260 Module. Take advantage of our hire options in order to complete your jobs efficiently, as the FTBx 88260 module is customisable to suit different technicians needs.

EXFO 100G Tester (FTB 2 Pro)

Test 100G with our FTB 2 Pro and FTBx-88260 Module. Take advantage of our hire options in order to complete your jobs efficiently, as the FTBx 88260 module is customisable to suit different technicians needs.

FLS 600 & PX1 | Optical Loss Kit | EXFO

The new Optical Loss Kit with the FLS 600 and PX1 is the most reliable tool for network-link qualification.

EXFO CD/PMD Analyser

The FTB-2-Pro is the most compact solution on the market for multi-service, multi-technology, multi-rate testing which delivers all the power of a larger platform in a conveniently sized field-testing tool. The FTB-5700 is the ultimate CD/PMD characterization solution.

FLS 300 | Optical Light Source | EXFO

The FLS 300 is the most versatile, complete light source available with up to three single-mode wavelengths on a single port, or four wavelengths (two multimode and two single-mode) on two ports.

PPM 350C | PON Signals | EXFO

Highly versatile handheld power meter that enables quick, on-site testing of all PON signals, anywhere on the network.

MAX FIP | Intelligent Connector & Fibre Certifier | EXFO

The MAX FIP rugged, tablet-inspired design featuring the latest innovations in automated connector and fiber certification. Ensures that workflow and best practices are followed by simplifying and speeding up the essential/critical inspection phase.

LFD 200 | Live Fibre Detector | EXFO

The LFD 200 allows you to detect traffic and measure signals anywhere on single-mode fibres without having to disconnect them.

FLS 110 | Optical Source | EXFO

The FLS 110 is a polarised source—ideal for field PMD measurements and especially suited to PMD measurements using the FTB-5500B PMD Analyser

FiberBasix Power Meter | ILM | EXFO

The EPM-50 is one half of the FiberBasix kit and delivers simple, accurate measurement of signal attenuation during fiber-optic cable installation. The power meter comes with five calibrated wavelengths and measures dB, dBm and Watt measurement.  Easy-to-use interface for error-free testing, Interchangeable connectors, for first-class flexibility, Cost-effective, rugged and highly reliable, Ideal for testing and troubleshooting optical premises networks,

FiberBasix Light Source | ILM | EXFO

The ELS-50 is one half of the FiberBasix kit and delivers simple, accurate measurement of signal attenuation during fiber-optic cable installation.  Easy-to-use interface for error-free testing, Interchangeable connectors, for first-class flexibility, Cost-effective, rugged and highly reliable, Ideal for testing and troubleshooting optical premises networks,

FTTH Kit | OTDR, Inspection probe & Leads | EXFO

FTBx-730C | LAN/WAN Access OTDR | EXFO

The FTBx-730C is an OTDR module that is optimised for FTTx/MDU Fibre deployments and troubleshooting.

iADV (iOLM Advanced) | EXFO

iOLM is an innovative OTDR-based application that uses multi-pulse acquisitions and advanced algorithms to deliver information on every element in the link. The application provides one-touch, automatic analysis and clear link view display as well as, minimises training and avoids misconfiguration via automatic parameter settings and clear go/no-go results. iADV is an advanced version of iOLM featuring: iOLM Expert mode, elements and link edition, 2:N splitter characterisation, custom elements, OTDR real time mode via iOLM application, PON last mile certification optimode (Available only with MAX-730c) *Requires iOLM or OI enabling*

PPM1 | PON Power Meter | EXFO

The PPM 1 (PON Power Meter 1) is a versatile dual-layer tester which is purpose-built for PON (Passive Optical Networks) service activation.

EX10 | EXFO

A robust device for installers, the EX10 helps onsite technicians easily validate bandwidth speeds up to full line rate 10 Gigabit Ethernet and test residential WiFi 6E to monitor residential quality of experience.

PXM/LXM MPO Optical Loss Test Set | EXFO

PXM/LXM MPO Optical Loss Test Set - EXFO's full-featured MPO-12 power meter and light source with the industry's fastest test speeds.

Max Tester 715D | Last Mile OTDR | EXFO

Introducing the all-new Max Tester 715D from EXFO - the ultimate entry-level solution for fibre testing and measurement. The Max Tester 715D OTDR is optimised for the point-to-point testing and troubleshooting of FTTx architectures and is ideal for testing short fibres. The MaxTester 715B delivers EXFO’s quality and accuracy along with the best optical performance for right-first-time results.

MaxTester 730D | FTTx/PON SM OTDR | EXFO

Presenting the latest innovation from EXFO: the MaxTester 730D OTDR, designed to revolutionise fibre testing and measurement. Engineered with precision, the MaxTester 730D is ideal for metro applications and optimized for testing through optical splitters, ensuring seamless end-to-end FTTH characterization and troubleshooting.

FTBx-730D | PON FTTx/MDU OTDR Module | EXFO

The brand new FTBx-730D is the OTDR module of choice for engineers who need to seamlessly characterises splitters in PON FTTx and MDU applications. This OTDR is optimised to test through splitters and troubleshoot links up to 100km. The FTBx-730D boasts the highest resolution for PON testing and the shortest PON dead zone which helps engineers find more problems closer to the splitter than any OTDR.

FTTx Technician Specified Project Kit

Introducing fit for purpose FTTx project kits for fibre contractors and fibre engineers working on FTTx networks. With 20 years experience in training fibre technicians and providing the latest in testing and installation equipment, Fibreplus knows exactly what you need to succeed. Every kit contains the must-have equipment and modules specified by providers like Virgin Media, CityFibre, Gigaclear, TOOB, Hyperoptic and more.