£2,090.00exc. VAT
The INNO-View 3 is a high performance, clad-alignment splicer in compact design, it is the most dependable fusion splicer on the market.
For Great Savings
Check our Ex-Demonstrator Stock
| Model | Weekly | Monthly |
|---|---|---|
| View 3 | INNO | £161.00 | £424.00 |
* Prices exclude any additional accessories, software options and services;
The INNO-View 3 is a high performance, clad-alignment splicer in compact design, it is the most dependable fusion splicer on the market. The fusion splicer is equipped with user-friendly GUI and high-resolution colour LCD touch screen which is 5 inches in size. This means you can check the optical fiber with clear images and high magnification, allowing the users to double-tap the screen to enlarge the screen up to 520 times. The INNO-View 3 has a battery capacity typically of 170 splices including heating. Furthermore, a splicing time of as quick as 7-9 seconds and a heating time of 30 seconds.
| Number of Fibres | Single |
| Applicable Fibres | SM (ITU-T G.652&G.657) / MM(ITU-T G.651) / DS(ITU-T G.653) / NZDS(ITU-T G.655) |
| Compatible Fibres | 0.25~3.0mm/Indoor Cable |
| Cleaved Length | Diameter: 0.125~1mm / Cleave Length: 8~16mm |
| Cladding Diameter | 80-150µm |
| Splicing Mode | Max 128 modes |
| Heating Mode | Max 32 modes |
| Typical Splice Loss | >>60dB |
| Heating Sleeve Length | 20~60mm |
| Results Storage | The last 2000 results |
| Tension Test | 1.96~2.25N |
| Operating Condition | Operating Altitude: 0~5000 above sea level, 0~95% relative humidity, -10~50℃, Max Wind 15m/s |
| Storage Condition | 0~95% relative humidity, -40~80℃ |
| Display | 90˚ bi-directional view, 5 |
| Fibre View & Magnification | X, Y, XY, X/Y : 520X Magnification |
| Power Supply | AC Input 100-240V, DC Input 9-14V |
| Operating Methods | Button/Touch |
| Automatic Calibration | Automatic arc calibration by air pressure and temperature |
| Electrode Life | 3500 acs, can be extended by using electrode grinder |
| Terminal | USB2.0 / MINI USB/ HDMI |
| Battery Capacity | 170 Splice and Heat Cycles |
| Splice Methods | Cladding alignment |
| Heat Time | FP-03 typical heating time: 30 sec |
| Name |
|---|
| INNO_Splicer_View3 Spec Sheet |
