01225 636041
Est. Total:£0.00 Excluding POA
Cart/Order/Enquiry
The MaxTester 635G (MAX-635G) is EXFOs efficient copper characterization to 35MHz and DSL/Gfast analysis. This enables users to analysis the installation and maintenance of ultra-broadband deployments.
Removable tips for use with the EXFO range of FIP inspection probes.
Connector adaptor for use with EXFO test equipment that use FOA adaptors for the power meters such as: FPM600 FOT600 FOT930 EXFO OTDR's with optional power meter
Connector adaptor for use with EXFO test equipment that use EUI adaptors for the light sources such as: FLS600 FOT600 FOT930 EXFO OTDR's EUI's can be used for UPC or APC interfaces.
2.3mm to 1.25mm adapter for the EXFO FLS-240 Visual Fault Locator.
Our Bare Fibre Adaptors quickly connects your test equipment to bare fibre. The system utilises replicable index matching gel cartridges which results in quick low loss, low reflectance connections to your OTDR or other systems.
These replaceable cartridges are to be used inside the Divot® module (Bare Fibre Adapter) and come in packs of 3. The Divot® Module can be easily disassembled in order to replace the internal cartridge. Every insertion of bare fiber will use a small amount of coupling compound from the cartridge. A cartridge will typically yield a minimum of 500 insertions.
The Multi Fiber Switch reduces human manipulation by 90%, which in turn significantly reduces the risk of error. Thanks to the intelligent multifiber algorithm (iMF), a single push of the Start button initiates a fully automated test sequence of the 12 fibers, resulting in 12 single measurements. The Switch tests the individual fibres of an MPO connectorised cable inside or outside the data centre.
Clean-out wire for use with the following products: Bullet Bare Fiber Adapter Kits Bullet Bare Fiber Adapters Divot Bare Fibre Testing Device Available in 40pcs pack.