Turn your Android™ device into a fully automated fibre inspection solution delivering fast and consistent test results. With no wire in your way or cumbersome battery pack, it provides unmatched user experience combined with bring-it-anywhere portability.
Turn your Android™ device into a fully automated fibre inspection solution delivering fast and consistent test results. With no wires in your way or cumbersome battery pack, it provides unmatched end-user experience, combined with bring-it-anywhere portability.
This intelligent and automated test tool transforms fibre inspection into a faster and simplified one-step process providing accurate and consistent test results, and preventing the reporting of false-positive results.
Connector inspection using automated analysis software to assess connector quality is an essential step during fibre commissioning and installation, and an integral part of best practices.
This intelligent and automated test tool transforms fibre inspection into a faster and simplified one-step process providing accurate and consistent test results, and preventing the reporting of false-positive results. Connector inspection using automated analysis software to assess connector quality is an essential step during fibre commissioning and installation, and an integral part of best practices.
Automated, all-in-one solution to validate MPO/MTP® fiber optic links of any type, including MPO 12 and MPO 24 singlemode or multimode cables as well as APC or UPC and male or female connectors.
Test now or put your network at risk
Multifibre push-on (MPO) connectors are increasingly popular because they provide many advantages to high-speed network operators, owners and installation companies. They are used to connect the fastest links that deliver the most sensitive of services and data to customers, enable high-speed interconnects and create redundancy.
Increasingly, telcos are also reconfiguring their central offices into data centers (CORDs) and deploying MPO cables with 12, but more and more, 24 fibers. When not properly tested, multifiber links can put the entire health of a network at risk. Without proper validation, CORD operators may end up having to pull the plug on critical lines at the same time for troubleshooting.
Traditional methods fall short
Traditional multifiber testing solutions often fall short on design or price, can’t perform all three critical tests or don’t offer analysis and reporting capabilities. Customers are left choosing between solutions that are either too much for what they really need (and too expensive) or sorely lacking in features and fit. What's more, they often have to buy different units to get the job done.
To avoid downtime, techs need simple, easy-to-use tools—and a clear, reliable method—to get essential testing required done quickly and accurately.
One solution, three essential MPO tests
The ConnectorMax MPO Link Test Solution takes the three essential tests needed to validate MPO links—polarity, continuity and connector cleanliness—and combines them into one automated solution. It pairs a light source at one end of the cable with a fiber inspection probe for analysis at the other end—a first in the industry. The solution brings together the ConnectorMax Multifiber Source with the ConnectorMax Fiber Inspection Probe to deliver a quick and easy-to-use solution that validates the polarity type, continuity and connector cleanliness of MPO fiber optic links. It provides a fit for purpose solution that helps our customers test and turn up networks right the first time—making deployments faster, more efficient and cost effective.
As many customers already own an EXFO probe, this solution is highly economical. Not only do field technicians already benefit from the best MPO inspection tool on the market that eradicates the number one cause of network failures (contaminated connectors), it now enables them to check polarity and continuity, in just about the same time as inspection alone.
Results are loaded in the ConnectorMax Analysis Software, an app for mobile devices providing clear pass/fail status and reporting functions, making it easy for technicians to perform and view the results of all three of these tests on the spot.
Validate polarity, continuity and connector cleanliness
During installation, MPO connectors must be properly aligned and mated—not as simple as it sounds. Ensuring accurate polarity for MPO fiber array cables is a big deal and can be complicated to manage due to multiple polarity schemes available for these connectors and polarity flipping during connecting and installation. Polarity validation is proving especially critical with the new MPO connectors that enable polarity reconfiguration in the field. Validating the polarity type would ensure that the signal path is the expected one and that the proper Tx will talk to the right Rx.
Confirming the continuity of a link ensures that there is no break and that light travels properly all the way to the end of the link under test. It’s a quick continuity test for cables that, when done at time of installation, can save a lot of time in potential troubleshooting later.
With the contaminated connectors being the number one cause of network failure, connector inspection is a priority. Bad connectors are the main cause of loss for cables and short links up to 5 km and the impact is even greater for MPO links where a single dirty or damaged connector can affect as many as 12 or 24 fibers.
Reduce OPEX Reduce OPEX
Save time: get a clear pass/fail diagnosis of the problem, whether it is polarity, continuity or connector cleanliness, using one test
Save time: get a complete report with a single click
Reduce CAPEX Reduce CAPEX
Stop wasting expensive MPO patch cords that are in perfect condition
Avoid spending money on overkill products that provide more information than required for the task
Invest in a single solution to perform all tests—no need for different testers to test different types of MPO cables
Accelerate and increase revenue Accelerate and increase revenue
With MPO links containing multiple fibers, turning down a link for troubleshooting can effect multiple clients and create customer churn. Using EXFO’s ConnectorMax solution will ensure links are valid and network downtime minimized.
Automated and fumble-free
Automatically inspect multifiber connectors without the hassle of manipulating scanning knobs.
Right the first time
No repeats, no missed fibers, no confusion. View and validate all fibers on the first try.
Find dirty connectors—fast
Chances are that at least one of your multifiber connectors is dirty. Inspect quickly and easily using a tool specifically designed for accessing dense panels and minimizing inspection time. No more excuses for blind connections!
Belt holster for FIP-425B / 435BFits one FIP-425B or 435B, Extra tips, Two IBC cleaner, FLS140 VFL or Penand one Smartphone (150x75x10 mm)
Removable tips for use with the EXFO range of FIP inspection probes.
One software does it all
FastReporter equips you with the right post-processing functionalities to overcome the challenges of analyzing fiber-optic test and measurement data, whatever the application. Designed for off-line or live analysis of field-acquired data, FastReporter has a highly intuitive interface for ease of use.
With a single software to manage data and generate reports for all your optical-layer test applications, you are on the right path towards high efficiency and productivity.
That’s not all. FastReporter is now included in EXFO’s TestFlow–an innovative cloud-based field test management solution. You can now benefit from faster job completion thanks to the automated diagnosis of measurements and batch results analysis.
Efficient Fibre Operation Starts with High Quality Connections. EXFO’s Range of Inspection Equipment Ensures Accurate Assessment Every Time, First Time.